How Much Paint for a Room? Litres per sq ft and Packs

Wall area in sq ft, reading "per coat" and "for 2 coats" coverage on Indian paint packs, primer and putty steps, and choosing 20, 10, 4 and 1 litre packs.

By · · 9 min read

Illustration for the Paint Calculator guide

India edition. Rooms in feet and paint in litres as sold in India, with coverage in sq ft per litre from Asian Paints product pages, the primer, putty and primer system, 20, 10, 4 and 1 litre packs at listed MRPs in rupees, curing of new walls and the 90 ppm lead rule. US edition

For a 12 x 10 ft bedroom with a 10 ft ceiling, one door and one window, the walls come to 403 sq ft and the ceiling to 120 sq ft. Two coats of an interior emulsion at about 260 sq ft per litre per coat need about 3.1 litres for the walls and 4 litres with the ceiling, which is a 4 litre pack, plus a 1 litre pack if the ceiling is in the same paint. The figure that decides all of this is the coverage on the pack, and Indian paint makers print it in two different ways. This guide shows how to read it, how to measure the room in feet, and how to choose between 20, 10, 4 and 1 litre packs, using the Paint Calculator (India).

Measure the walls in feet, not the floor in sq ft

Indian rooms are measured in feet, and a flat is sold by its carpet area, but paint goes on walls. Take the room's length, width and floor-to-ceiling height, and treat the four walls as one strip as long as the perimeter.

wall area    = 2 x (length + width) x height
ceiling area = length x width

The 12 x 10 ft bedroom has a 44 ft perimeter and 440 sq ft of wall. A 3 x 7 ft door is 21 sq ft and a 4 x 4 ft window 16 sq ft, so 403 sq ft is left to paint. Its floor is only 120 sq ft: wall area is more than three times the floor in a room with a 10 ft ceiling, which is why "paint per sq ft of carpet area" rules of thumb go wrong.

A 12 by 10 foot bedroom unfolded: 44 feet of wall 10 feet high is 440 square feet, minus a 21 square foot door and a 16 square foot window leaves 403 square feet, which is 3.10 litres for two coats at 260 square feet per litre per coat
A 12 by 10 foot bedroom unfolded: 44 feet of wall 10 feet high is 440 square feet, minus a 21 square foot door and a 16 square foot window leaves 403 square feet, which is 3.10 litres for two coats at 260 square feet per litre per coat

Take off built-in wardrobes, a tiled kitchen dado or bathroom walls, and any wall getting texture or wallpaper instead. Window grilles and small switchboards are not worth subtracting.

Reading coverage on an Indian paint pack

Coverage is the area one litre covers, and Indian product pages quote it in sq ft per litre on a normal masonry surface. The trap is that one product may give a one-coat figure and a two-coat figure side by side. Asian Paints lists Apcolite Premium Emulsion at 260 to 300 sq ft per litre for one coat and 130 to 150 sq ft per litre for two coats. The second figure is simply the first halved: one litre spread twice over the same wall covers half the area.

Tractor Emulsion Shyne is listed at 250 to 270 sq ft per litre for the first coat and 130 to 150 for the second. Read next to the Apcolite page, the 130 to 150 looks like the same two-coat figure under a different label, but the page does not say so. If you take it at its word, the second coat covers barely half what the first does and the job needs about 40% more paint. Either way, the calculator needs coverage per coat, and it multiplies by the number of coats itself:

What the pack saysWhat to enterCoats
260 sq ft/L for one coat2602
130 sq ft/L for two coats260 (double it)2
130 sq ft/L for two coats1301
First coat 260, second coat 140, each per coatrun 1 coat at 260 and 1 coat at 140, then add1 + 1

The range matters as well. For the bedroom with its ceiling, two coats need 4.02 litres at 260 sq ft per litre per coat but 3.49 litres at 300. The first is a 4 litre pack plus a 1 litre pack; the second fits in one 4 litre pack. Rough plaster, a strong change of shade and textured surfaces all cover less than the pack figure, so take the low end unless the walls are smooth and already painted.

Primer, putty and the number of coats

A fresh paint job on new plaster in India is a system, not just two coats. Asian Paints' recommended system for both emulsions above is one coat of interior primer, two coats of acrylic wall putty, a second coat of primer, then two top coats. Each layer has its own pack and its own coverage, so estimate them separately; in the calculator, add the primer as a primer coat with the coverage from its pack, and work putty out from the kilograms per sq ft printed on its bag.

Before any of that, new masonry needs to cure. Both product pages give 28 days for new walls before painting. Repainting a sound wall in a similar shade usually needs only the top coats; a dark-to-light change may need a primer coat first.

Most interior emulsions are thinned with water before use, and the product page or pack gives the dilution (50 to 60% for Tractor Emulsion Shyne). Thin as directed and use the pack's coverage for the paint as you buy it.

From litres to packs, and what they cost

Interior emulsions are sold in 20, 10, 4 and 1 litre packs. The calculator picks the combination that covers the job with the least paint left over and never suggests more than two 1 litre packs, because three small packs almost always cost more than one 4 litre pack. The MRPs below are the prices listed on the Asian Paints product pages, inclusive of taxes, when checked in November 2026; shade and dealer discounts change them.

Job (2 coats at 260 sq ft/L per coat)LitresPacks suggestedTractor Emulsion Shyne MRPApcolite Premium Emulsion MRP
Bedroom walls only3.104 L₹1,250₹2,100
Bedroom walls and ceiling4.024 L + 1 L₹1,580₹2,640
Four rooms of a 2BHK, 12 x 10 ft each, walls and ceilings16.0910 L + 2 x 4 L₹5,400₹9,150
Same 2BHK as one 20 L bucket2020 L₹5,550₹9,650

For the 2BHK, the 10 L and two 4 L packs cost less than a 20 L bucket at both price levels, and you are left with under 2 litres rather than nearly 4. At other quantities the bucket wins, so enter your dealer's prices in the calculator and compare its suggestion with the next size up. Ceilings are often done in a different white or a cheaper product, and the calculator shows wall and ceiling litres separately for that reason: in the 2BHK, 12.40 litres for walls and 3.69 for ceilings.

Whatever you buy, get all the packs of one shade together and mix them in one bucket before painting, so tinting differences between packs do not show on a wall.

Lead, safety and older walls

Since the Regulation of Lead Contents in Household and Decorative Paints Rules, 2016, household and decorative paints sold in India must not contain more than 90 ppm of lead and must say so on the label. Older paint layers in a house painted before the rules may contain more, so it is safer to scrape and sand them wet rather than dry, and to keep children away from the dust. The Indian Standards for paints and other building materials are published by the Bureau of Indian Standards.

Common mistakes

  • Estimating from carpet area. A room's walls are often three times its floor area or more.
  • Entering a two-coat coverage with two coats. That halves the coverage twice and doubles the paint.
  • Forgetting primer and putty on new plaster. They are separate products and separate costs.
  • Painting too soon. New masonry needs its 28 days.
  • Buying shades in stages. Packs tinted on different days may not match.

Frequently asked questions

How many sq ft does 1 litre of paint cover?

For a typical interior emulsion, about 260 to 300 sq ft for one coat on a normal masonry wall, which is 130 to 150 sq ft when you apply two coats. Asian Paints gives those figures for Apcolite Premium Emulsion. Rough walls and textures cover less.

How much paint is needed for a 2BHK?

For four rooms of 12 x 10 ft with 10 ft ceilings, a door and a window each, walls and ceilings come to about 2,092 sq ft. Two coats at 260 sq ft per litre per coat need about 16.1 litres, for example a 10 L and two 4 L packs. Kitchens, toilets and the living room of your own flat will change this, so measure each room.

What does "130 to 150 sq ft per litre for 2 coats" mean?

It is the area one litre covers when you apply it twice. Double it to get the one-coat coverage the calculator asks for, or enter it with one coat. Entering 130 with two coats would count the second coat twice.

Do I need putty before painting?

On new plaster or patched walls, paint makers list putty in their system: Asian Paints recommends a primer coat, two coats of acrylic wall putty, another primer coat and two top coats. A sound, previously painted wall in a similar shade usually needs only the top coats.

Is a 20 litre bucket cheaper than smaller packs?

Not always. At the listed MRPs a 10 L and two 4 L packs of Tractor Emulsion Shyne cost ₹5,400 against ₹5,550 for 20 L, and cover a 16 litre job. For a job close to 20 litres the bucket usually wins, so compare your dealer's prices.

Sources and further reading

Open the Paint Calculator

More Construction & Home

Every tool in the Construction & Home section, free and in your browser.