How Much Paint Do I Need? 3.78 L Cans for a Room in Canada
Measure in feet, read coverage in square metres per can, and buy 946 mL, 3.78 L and 18.9 L cans, with basement drywall primer and lead paint advice.
By Redbison Dev · · 9 min read

Canada edition. Written for Canada, with rooms in feet, paint sold in 946 mL, 3.78 L and 18.9 L cans, labels that give coverage in square metres per can, prices in CA$, basement drywall, federal VOC limits and Health Canada advice on lead paint. US edition
For an 11 by 12 foot bedroom with 8 foot walls, one door and one window, two coats on the walls take about 1.7 cans of 3.78 L at 400 sq ft per can, so you buy two cans, plus one more for the ceiling if it is the same paint. That answer rests on three numbers: the wall area, the number of coats, and the coverage per can, which Canadian labels often print in square metres while you measured the room in feet. This guide shows how to get each one right and how to choose between 946 mL cans, 3.78 L cans and 18.9 L pails, using the Paint Calculator (Canada).
Canadian paint sizes are US gallons in litres
Paint in Canada is sold in metric volumes that are really US gallon sizes. A 3.78 L can is one US gallon (3.785 L, which some brands round to 3.79 L), an 18.9 L pail is five, and a 946 mL can is a quart. An imperial gallon would be 4.55 L, and paint is not sold in it. The calculator's "gal" is therefore one 3.78 L can and its "qt" one 946 mL can.
That matters when you read a coverage figure. "400 sq ft per gallon" on a US website and "37 m² per 3.79 L can" on a Canadian label describe the same container, so you can compare them directly once the area is in the same unit.
Measure the walls in feet
Paint covers walls, so start with the room's length, width and wall height. The four walls together are one strip as long as the perimeter:
wall area = 2 x (length + width) x height
ceiling area = length x width
The bedroom's perimeter is 46 ft, so it has 368 sq ft of wall. A standard interior door is about 21 sq ft and a 3 x 5 ft window 15 sq ft, which leaves 332 sq ft to paint. The ceiling adds 132 sq ft.
Take out large areas you will not paint: a tiled backsplash, a wall of built-in shelving, a wall you are wallpapering. Leave out trim, which is usually a different sheen bought separately.
Reading the label: square metres per can
Many Canadian labels and product pages give coverage in square metres per can. Benjamin Moore's Canadian page for Regal Select Ulti-Matte, for example, lists 37 to 42 m² per 3.79 L can and "1 or 2" coats. To use it with a room measured in feet, multiply by 10.764: 37 m² is about 398 sq ft per can and 42 m² about 452.
Which end of the range you pick changes the order for the same bedroom walls:
| Coverage per can | Cans for two coats | What the calculator buys |
|---|---|---|
| 452 sq ft (42 m²) | 1.47 | one 3.78 L can and two 946 mL cans |
| 400 sq ft (37 m²) | 1.66 | two 3.78 L cans |
The top of a range is for smooth, sealed, previously painted walls. New drywall, joint compound, a strong colour change or a textured ceiling all cover less, so use the low end or below.
Coats and primer, especially in basements
Two coats is the normal plan for a wall, even with a paint that says one may do. The first coat soaks into patches and joint compound unevenly; the second evens out colour and sheen. A white ceiling refreshed in the same white often needs one.
Basements are where Canadian paint estimates usually go wrong, because a finished basement is mostly new drywall. Bare drywall and taped joints absorb paint unevenly and show through the finish, so a drywall primer goes on first, and it often covers less than the paint. A 24 x 16 ft rec room with 8 ft walls, two doors and two small windows has 586 sq ft of wall and a 384 sq ft ceiling, 970 sq ft in all. One primer coat at 300 sq ft per can needs 3.23 cans; two finish coats at 400 need 4.85 cans, which is one 18.9 L pail with a little to spare. Paint a basement when it is warm and dry: cold concrete walls and high humidity slow drying.
From cans to a shopping list
The calculator picks the combination of 18.9 L pails, 3.78 L cans and 946 mL cans that covers the job with least left over, and never more than two 946 mL cans, because a third almost always costs more than a 3.78 L can.
| Job | Cans of 3.78 L needed | Suggested purchase |
|---|---|---|
| Bedroom walls, 2 coats at 400 | 1.66 | two 3.78 L cans |
| Bedroom walls and ceiling, 2 coats | 2.32 | two 3.78 L cans and two 946 mL cans |
| Three bedrooms the same size, walls only | 4.98 | one 18.9 L pail |
| Basement rec room, primer | 3.23 | three 3.78 L cans and one 946 mL can |
| Basement rec room, finish coats | 4.85 | one 18.9 L pail |
A pail is five cans of one batch, so it also keeps the colour the same across rooms. Enter your store's prices in CA$ for each size and the calculator totals its suggestion; compare it with the next size up, because pail pricing and sales often change the answer. In practice the bedroom ceiling would be a separate ceiling white: 0.66 of a can, so one 3.78 L can.
Older homes and what is in the can
If your home was built before 1960, Health Canada says it probably contains lead-based paint, and homes built between 1960 and 1990 may have it on the exterior and in smaller amounts inside. Its advice is not to use sanders, heat guns or blowlamps on lead paint, to keep children and pregnant women away from the work, and to consider hiring an expert. Paint that is intact and out of children's reach can be safer left alone, and Health Canada suggests covering it with wallpaper, wallboard or panelling for extra security.
New paint is regulated too. The federal VOC Concentration Limits for Architectural Coatings Regulations set maximum VOC content for 53 categories of architectural coatings, including interior and exterior paints, and apply to manufacturers, importers and sellers; Environment and Climate Change Canada explains the rules.
Common mistakes
- Using floor area. The bedroom's 132 sq ft floor has 368 sq ft of wall around it.
- Mixing units. A label's 37 m² is not 37 sq ft per can; multiply by 10.764.
- Skipping primer on new drywall. In a basement it can be the largest single purchase after the paint.
- Trusting the top of the coverage range. Use it only for smooth, previously painted walls.
- Buying cans a week apart. Tinted batches can differ; buy the whole job at once and mix the cans together.
If you are papering instead, start from the same measurements; for odd-shaped rooms, the Square Footage Calculator (Canada) adds up the pieces.
Frequently asked questions
Is a 3.78 L can of paint a gallon?
Yes, a US gallon of 3.785 L, which some brands label 3.79 L. Canadian paint comes in US gallon multiples labelled in litres: 946 mL (a quart), 3.78 L and 18.9 L (five gallons). An imperial gallon is 4.55 L, and paint is not sold in that size.
How do I convert m² per can to square feet?
Multiply by 10.764. A label that says 37 to 42 m² per 3.79 L can covers about 398 to 452 sq ft per can for one coat. Enter the square feet figure in the calculator when your room is measured in feet.
How much primer do I need for a basement?
One coat over all the new drywall and the ceiling. For a 24 x 16 ft rec room with 8 ft walls, that is about 970 sq ft; at 300 sq ft per can, about 3.2 cans of 3.78 L. Check your primer's label, because drywall primers often cover less than paint.
Do I have to remove old lead paint before repainting?
No. Health Canada says leaving lead-based paint undisturbed can be safer than removing it, as long as it is not chipping or within children's reach. If you do remove it, do not use sanders, heat guns or blowlamps, and consider hiring an expert.
Is an 18.9 L pail cheaper than five cans?
Usually per litre, and it is one batch. Enter your store's prices for each size and compare the calculator's suggestion with the alternative, since sales can change the answer.
Sources and further reading
- Lead-based paint, Health Canada. Which homes probably contain lead paint and how to deal with it safely.
- Volatile Organic Compound (VOC) Concentration Limits for Architectural Coatings Regulations (SOR/2009-264), Justice Laws Website. VOC limits by coating category.
- VOC concentration limits for architectural coatings regulations, Environment and Climate Change Canada. Who must comply and how.
- Regal Select Waterborne Interior Paint, Ulti-Matte, Benjamin Moore Canada. Coverage of 37 to 42 m² per 3.79 L can.
- Weights and Measures Act, Justice Laws Website. Canadian units of measurement, metric and imperial.
More Construction & Home
Every tool in the Construction & Home section, free and in your browser.