How Much Paint Do I Need? Litres per m² for NZ Homes

Work out litres of paint from area, coats and the spreading rate on the data sheet, for new GIB walls with sealer, ceilings, bathrooms and weatherboards.

By · · 9 min read

Illustration for the Paint Calculator guide

New Zealand edition. New Zealand edition in metres and litres using Resene's formula and data-sheet spreading rates (sealer 12, wall paint 14 to 16, ceiling paint 10, bathroom paint 11 and weatherboard paint 12 m² per litre), with a new GIB-lined lounge carried through every step. US edition

Resene gives the sum on its paint calculator page: surface area divided by the spreading rate, times the number of coats, is the litres you need. For a new GIB-lined lounge of 4.2 by 3.6 metres with a 2.4 metre stud, that comes to about 4.1 litres of wallboard sealer for walls and ceiling, 4.8 litres of wall paint for two coats on the 33.7 m² of walls, and 3.0 litres of ceiling paint for two coats on the 15.1 m² ceiling. Every figure depends on the spreading rate printed for the exact product, so this edition takes them from Resene's data sheets and works through them with the Paint Calculator.

The formula, with Resene's own example

The Resene paint calculator page writes it as:

(surface area / spreading rate) x number of coats = litres of paint

Its worked example is a living room with 3 m walls about 4 m wide, losing about 0.5 m of each wall to doors and windows: 14 m x 3 m = 42 m². At 11 m² per litre for Resene SpaceCote Low Sheen and two coats over sound paint, 42 / 11 x 2 = 7.6 litres, so it suggests buying 8.

The spreading rate is the "theoretical coverage" on the data sheet and "coverage" on the label; the same page warns that porous surfaces and shapes, such as corrugated iron, need more.

Spreading rates from the data sheets

ProductUseSpreading rateUsual coats
Broadwall Waterborne Wallboard SealerFirst coat on new paperfaced plasterboard12 m²/L1
Zylone SheenInterior walls14 to 16 m²/L2, some colours 3
Ceiling Paint FlatCeilings10 m²/L1 to 2
SpaceCote Low SheenKitchens, bathrooms, laundries11 m²/L2
LumbersiderExterior weatherboards and trim12 m²/L2, some colours 3

Two consequences. Ceiling paint spreads less far than wall paint, so work ceilings out separately. And the sealer is not optional on new board: the Zylone Sheen data sheet calls for Broadwall Waterborne Wallboard Sealer on new paperfaced plasterboard, which is prepared to a level of finish suitable for the paint.

Worked example: the new GIB lounge

The room is 4.2 x 3.6 m with a 2.4 m stud, one 810 x 1980 mm door and one 1800 x 1200 mm window, the same lounge as in the GIB sheets guide:

walls   = 2 x (4.2 + 3.6) x 2.4 - (0.81 x 1.98 + 1.8 x 1.2) = 33.68 m²
ceiling = 4.2 x 3.6                                       = 15.12 m²
CoatAreaRateCoatsLitresTins
Sealer, walls and ceiling48.80 m²1214.074 L + 1 L
Wall paint33.68 m²1424.814 L + 1 L
Ceiling paint15.12 m²1023.024 L
Ceiling paint, one coat15.12 m²1011.512 x 1 L
Bar chart of litres of paint: lounge sealer on 48.8 m² at one coat and 12 m² per litre needs 4.07 litres; lounge walls 33.7 m² at two coats and 14 needs 4.81 litres; lounge ceiling 15.1 m² at two coats and 10 needs 3.02 litres; bathroom walls 14.5 m² at two coats and 11 needs 2.64 litres; weatherboards 71.7 m² at two coats and 12 needs 11.95 litres
Bar chart of litres of paint: lounge sealer on 48.8 m² at one coat and 12 m² per litre needs 4.07 litres; lounge walls 33.7 m² at two coats and 14 needs 4.81 litres; lounge ceiling 15.1 m² at two coats and 10 needs 3.02 litres; bathroom walls 14.5 m² at two coats and 11 needs 2.64 litres; weatherboards 71.7 m² at two coats and 12 needs 11.95 litres

At the top of the Zylone Sheen range, 16 m² per litre, the walls need 4.21 litres, so the 4 L + 1 L purchase covers either end. The ceiling paint data sheet notes that its flow and build often hide the surface in one coat, so on a sealed new ceiling you may stop at one and keep the second tin. The calculator's tins are 15, 10, 4 and 1 litre; check the sizes your store stocks and price a 10 L against two 4 L tins when the total is close.

A bathroom

A 2.4 x 1.8 m bathroom with a 2.4 m stud, a 760 x 1980 mm door, a 600 x 900 mm window and a 1.8 x 2.0 m tiled shower wall has 14.52 m² to paint. At 11 m² per litre for a kitchen-and-bathroom paint over two coats, that is 2.64 litres: one 4 L tin. SpaceCote Low Sheen's data sheet lists bathrooms, kitchens and laundries among its uses and says it inhibits mould growth; treat any existing mould first with the product its data sheet names before you paint.

Weatherboards

For a single-storey house of 10 x 8 m with 2.4 m walls, eight 1.2 x 1.2 m windows and two 810 x 1980 mm doors, the walls are 86.4 m² gross and 71.67 m² to paint. At Lumbersider's 12 m² per litre and two coats:

71.67 / 12 x 2 = 11.95 litres -> 10 L + 2 x 1 L

A deep colour needing a third coat takes it to 17.92 litres. Bare or weathered timber needs a primer first, and the Lumbersider data sheet says to fill nail holes and cracks after priming. Weatherboard laps and rough-sawn boards take more than the flat-wall figure; add 10% or more to the area.

Roofs follow a different rule of thumb on Resene's calculator page: the building's footprint plus about 40% for pitch, corrugations and overhangs, and more for trough-section roofing. The 80 m² footprint above is about 112 m² of corrugated roof to paint; use the spreading rate on the roof paint's data sheet.

Before you buy

  • Old paint. The data sheets warn that sanding dust from old lead- or chromate-based paints, and from old building materials containing asbestos, may harm your health if inhaled or swallowed. Get expert advice before sanding paint of unknown age.
  • Recoat times. Resene gives at least two hours between coats for Zylone Sheen, SpaceCote and Lumbersider in good conditions; cold, damp weather is slower, and Lumbersider should not be applied when the temperature is likely to drop below 10°C while drying.
  • Colour. Some colours need an extra coat. Add it in the calculator rather than hoping.
  • Leftovers. Keep a little, labelled with the colour, product and room, for touch-ups.

Tools for this job

Frequently asked questions

How much paint do I need for a room in NZ?

Divide the area by the spreading rate on the data sheet and multiply by the coats. A 4.2 x 3.6 m lounge with a 2.4 m stud has 33.7 m² of wall; two coats at 14 m² per litre need 4.8 litres. The ceiling, at 10 m² per litre, needs 3.0 litres for two coats.

How many m² does a litre of paint cover?

It depends on the product. Resene data sheets give 14 to 16 m² per litre for Zylone Sheen, 11 for SpaceCote Low Sheen, 10 for Ceiling Paint Flat and 12 for Broadwall sealer and Lumbersider. Rough or porous surfaces take more.

Do I need to seal new GIB before painting?

Yes. Resene's data sheets call for a wallboard sealer such as Broadwall Waterborne Wallboard Sealer on new paperfaced plasterboard, at about 12 m² per litre in one coat, before the topcoats.

How much paint do I need for the outside of a house?

Work out the wall area less windows and doors, then divide by the spreading rate and multiply by coats. A 10 x 8 m single-storey house with 2.4 m walls has about 71.7 m² to paint; two coats at 12 m² per litre need about 12 litres, more on rough-sawn boards.

Is one coat of ceiling paint enough?

Sometimes. Resene's ceiling paint data sheet says its flow and build mean one coat is often enough for complete hiding, and lists 1 to 2 coats. On new, sealed board in a light colour, try one and judge in daylight.

Sources and further reading

Open the Paint Calculator

More Construction & Home

Every tool in the Construction & Home section, free and in your browser.